UTME, STME and DTME measuring transducer disconnect terminal blocks

The new patented measuring transducer disconnect terminal blocks in the CLIPLINE complete system enable easy and individual structuring of current transformer measuring sets.

Disconnect, feed-through and PE terminal blocks of the same shape are available with different connection methods. The test disconnect terminal blocks are characterized by a compact design, easy operation and clear structure.

Consistent use of the CLIPLINE complete system accessories reduces your wiring and storage costs.

Practical starter kits

The new measuring transducer disconnect terminal blocks are available as practical starter kits with all the three connection methods. This allows easily structuring standard converter circuits, incl. a three-phase voltage path, e.g. for complete power measurement.

The sets contain

• 10 x disconnect terminal blocks,
• 1 x PE terminal blocks with the same shape,
• 6 x switching locks,
• 3 x 2-pos. short-circuit switches,
• 1 x 3-pos. non-adjacent plug-in bridge (connects 1, 3 and 5 pins) for chained converters,
• 3 x 2-pos.plug-in bridges,
• 3 x test sockets each in yellow, green and violet as well as a test socket in blue,
• additional accessories as cover, separating disk, end clamp and a 150 mm long DIN rail as well as
• assembly instructions in German and English

The links to the start kits for each connection method can be found at the end of this page.

Further information

The product catalog provides detailed information, e.g. ordering data, technical information, dimensional drawings, connection schemes, approvals, etc.

Further information and services related to this article