M12 flush-type connectors with metric fastening threads for device connection in accordance with IP67
Due to the switch from PG to metric threads in cable glands, more and more flange plates and industrial housings are being manufactured with metric housing cutouts or metric knockouts.
The mounting principle for PG and M16 threads is the same. The connector housings are guided from the inside through the housing wall and locked from the outside using a flat nut. The wrench surfaces of the fastening thread can still be used as a form of anti-rotation protection.
All flush-type connectors are available with wave solder contacts or with 0.5 m long halogen-free individual wires for all numbers of positions.
The solder-in versions are available with an additional shield contact, which is permanently connected to the housing. The shield required for fieldbus applications is thus routed onto the PCB directly.
When plugged in, all M12 connectors fulfill the requirements of the high IP67 degree of protection.
- Further information about M12 sensor/actuator flush-type connectors
- Further information about sensor/actuator cabling