Phoenix Contact Ltd has strengthened its UK management team by the appointment of Colin Green as General Manager and Martin Potter as Sales & Marketing Director
In addition to the familiar approvals for mechanical and plant engineering, many of the modules are certified in acc. with IEC 61508 / SIL3 for process engineering and in acc. with GL (Germanic Lloyd) for shipbuilding in particular.
A PC terminal block sets new standards - Phoenix Contact has been dealing with the field of thick conductors and offers the professional solution with MKDSP 25.
And as to ranges, high-performance FO interfaces open up new dimensions while still using the simplest of connection technology with polymer, HCS and glass fiber.
In order to be able to wire process controllers fast, clearly and fault-free, Phoenix Contact system cabling now has matching connection solutions for the process I/O systems DeltaV from Emerson and S800 I/O from ABB.
The DeltaV system allows you to install the process wiring via "mass termination blocks" using flat-ribbon cable plug connectors. Phoenix Contact implements made-to-measure wiring with the product line INTERFACE Cabling.
With "Wireless multiplexers", wireless transmission of 16 digital and 2 analog signals bidirectionally between two stations can be expected over distances of several hundred meters with no direct line-of-sight requirements.
With COMBICON compact, Phoenix Contact offers solutions for building communication and telecommunication. The new PT 2,5 terminal blocks are now available specially for mains connections.
Phoenix Contact expands its range of products for safety-related applications with 2 more modules: The isolation amplifiers have corresponded to the SIL 2 requirements since the year of manufacture 2005.
Make your standard voltage signals available - at little expense and within a minimum of space - No trouble for the new 8-channel analog output module of the Inline range of products.
The DATATRAB D-UFB-PB provides professional surge protection in a height of just 35 mm. The protective circuit is accommodated in a 9-pos. D-Sub connector to which the Profibus cable can be directly connected.
The success of the 76 A power plug connector PC 16 continues: Now with the feed-through version DFK-PC 16: 76 A at 600 V in acc. with UL through the housing panel - and all in no time at all.
The Ethernet 4-port switch for industrial application, 4 TP-RJ 45 ports 10/100 MBit/s and 1 Fiberoptic port, 100 MBit/s full duplex in SC-D format enables automatic detection of data transmission rate of 10 or 100 MBit/s (RJ 45), autocrossing function...
Complicated installation and wear of moving signal cables is in future a thing of the past. With the Wireless MUX, you can transmit digital and analog signals over a distance of up to 400 m between two locations.
Do you have an interface, for ETHERNET, ISDN, INTERBUS or PROFIBUS, for example, which you would like to protect against damage caused by surge voltages? We have the fitting surge protection device.
Installation terminal block in DT direct terminal connection system from PHOENIX CONTACT. Ideal for solid conductors. Dual bridge shafts for simple potential distribution. Ideal for building installation
Cost and time saving: High-temperature resistant pin strips - COMBICON and MINI-COMBICON pin strips for the reflow process are mounted together with SMD components using the "Pin in Paste" method and soldered in one reflow furnace operation.
In automation technology, Industrial Ethernet is increasingly used. The VARIOSUB-RJ45/IP67 plug connector is the suitable plug connector and satisfies the requirements of IAONA for use in heavy-duty areas.
The same accessories for all connection systems at PHOENIX CONTACT. Cut in stock and warehousing costs. All connection systems can be combined with each other.
COMBICON Select with integrated CAD library, also available as CD ROM, makes it possible to search fast and systematically for articles from the extensive Combicon range.
The world's narrowest Class II surge protection from Phoenix Contact. VALVETRAB compact reliably protects your systems and devices over just 12 mm per channel.
The heart of our communication platform AUTOMATIONWORX is the software. The programming software PC WorX is modular and is naturally based on international standards. Let the new functions convince you!
Are you looking for a simple and application-oriented way to implement complex communications solutions on an Ethernet basis? Then our MMS is the best alternative...
The new free update tool for CHECKMASTER makes updates child's play. Download the file, make the connection between the PC and CHECKMASTER, update and test.
ST-COMBI redefines pluggability in the control cabinet. Powerful plug-in contacts - 32 A at 800 V - guarantee operational safety even in critical applications.
POWER COMBICON is now even more powerful! The new PC 16 plug connectors allow plug-in connections for currents of up to 76 A and cross sections of up to 16 mm˛.
The QUINT POWER universal power supply convinces with new products with its normal high quality, e.g. the single-phase 24 V power supply unit with 40 A output current
Small, convenient to handle, and designed for transmissions of up to 12 mbps, DATATRAB D-UFB-PB, the new surge protection for Profibus applications is the right choice.
Complete control cabinet feed-through with Quickon fast connection system - 60% time saving with the connection of the world-wide spread HEAVYCON-B series.
The new contact inserts for the fiber optic connection from Phoenix Contact can be combined with all the modular inserts from the Variocon product family.
CLIP PROJECT makes it possible to not only select, configure and order complete terminal strips, but also put together and configure automation components fast and without difficulty.
VALVETRAB compact now also gives you reliable protection against surge voltages in power supply systems with 120 V...130 V AC nominal voltage. This is guaranteed by a rated surge arrester voltage of 175 V AC.
The GSM modem PSI-GSM/GPRS-MODEM/RS232 and the V.34 modem PSI-DATA/FAXMODEM/RS232 have been specially tailored to the industrial requirements of remote maintenance and alarm messaging.
With Fieldline Modular, Phoenix Contact has rounded off its range of I/O systems - Fieldline Modular captures digital and analog I/O data and bundles it to form a complete I/O map.
The new controller in the Inline system is a true communication system: With its controller performance, the ILC 370 ETH-2TX-IB is particularly suited for applications in the medium to upper performance range.
With the new PSI-REP repeater range from Phoenix Contact, it is now possible to realize structured installation concepts in Profibus, Modbus and numerous RS-485 systems.
Do you need weighing electronics which can be officially calibrated? Then look no further than the new strain gauge measurement terminal which can be officially calibrated. The terminal has been designed for direct installation in the control cabinet.
The safety relay has been specially adapted to the requirements for the controllers used in process automation. They can be used to implement applications up to SIL 3 as per IEC 61508.
The new universal upper parts for the known ME housing range enable the installation of PCB terminal blocks with 3.5 mm pitch as well as with 5 mm pitch.
In applications where double-level terminal blocks are not accepted, however, importance is attached to connection option for grounding or shielding, the new function terminals with integrated PE foot save space.
The T coupler connects interference-free industrial 300 m Ethernet systems using the easily installable POF/HCS technology. The integrated redundancy and management functions ensure high availability.
The new, pluggable and leakage-current free VAL-MS 800/30 VF/FM was specifically designed for the protection of the rotor of double fed asynchronous induction generators (DFIG).
Axioline is the realtime I/O system which is able to meet all your requirements in terms of the fastest possible response times and efficient production.
The new socket terminal blocks are exceptionally brilliant thanks to their wide insertion space and toolless push-in connection. The Europe terminal blocks are available as variants up to a connection cross-section of up to 25 mm˛.
From automatic cutting, stripping and crimping devices up to an extensive range of cable lugs and ferrules, Phoenix Contact offers a complete range for the assembly of cables and lines.
The new universal current transducers support the direct conversion of currents into a 4...20 mA standard signal in photovoltaic systems and wind turbines.
The new inverted connector with fast GFKIC push-in spring-cage connection method with 7.62 mm pitch for applications up to 1000 V is suitable for the connection of PCBs and as connector in freehanging connections.
The new universal upper parts for the known ME housing range enable the installation of PCB terminal blocks with 3.5 mm pitch as well as with 5 mm pitch. A combination of the pitches with the universal upper parts is also possible.
The PT 2,5/ ...- PVH-5,0 connector offers an enormous degree of flexibility in the connection direction, connection cross-section items and operating convenience.
With the new web panels, Phoenix Contact offers simple and uniform web-based solutions for the entry into process visualization for small machines and systems.
The RJ45 PROFINET connector with QUICKON fast connection technology, which can be assembled without tools, has undergone optimization. It is now even easier to connect AWG22 wires!
Requirements for PROFIsafe and PROFIdrive will also be handled from now on - especially those from the sectors of mechanical engineering and automobile.