INTERFACE Monitoring - Application examples
INTERFACE Monitoring modules allow you to monitor important network and system parameters cost-efficiently and continuously. And you can save yourself complicated bus systems or small controllers with additional programming effort. Thanks to the simplest installation and startup, you will achieve interference-free and efficient operation of your system.
Please select:
Undercurrent monitoring
If consumers fail, the current consumption drops. When the minimum limiting value is reached, a signal is sent to the remote monitor that service personnel can be activated.
Undervoltage monitoring
The battery voltage is recognized as undervoltage and a signal sent as soon as a set value is reached.
Phase sequence monitoring
Swapping two phase conductors alters the direction of rotation of three-phase induction motors.
Temperature monitoring of motor windings
By monitoring the PTC resistors on the motor windings, the motor is protected against overload.
Retriggerable release delay
If there is no pulse within the settable time, a signal is sent and the conveyor belt is switched off.
Switch-on delay
To avoid overload, conveyor belt 1 must first be switched on and then belt 2.
Switch-off delay
To avoid overload, conveyor belt 2 must first be switched off and then belt 1.
