News Archive




Contact extension for safety signals - now with wide range input

Contact extension for safety signals - now with wide range input

The new contact extension device enables safety-oriented signals for an input voltage range from 42 to 230 V AC/DC to be further processed as floating contacts.

Acquire short signals reliably using the new pulse extension module

Acquire short signals reliably using the new pulse extension module

Sensors provide very short signals in specific areas of application, including in conveying technology. With the new logic module, pulses greater than 0.1 milliseconds can be reliably acquired and expanded up to 2550 milliseconds.

Efficient safety solution for light grid applications

Efficient safety solution for light grid applications

The new contact extension device enables safety-oriented OSSD signals from a light grid to be further processed as floating contacts. As such, the safety-related circuits can be created up to PL e.

New highly-compact isolating amplifiers with modular group error indication

New highly-compact isolating amplifiers with modular group error indication

Seven new products offer additional functionality for our highly-compact MINI Analog isolating amplifiers. In addition, the new fault monitoring function offers modular error indication in multi-channel applications.

Redundancy modules now with Ex approval

Redundancy modules now with Ex approval

The QUINT ORING active redundancy modules, with Ex approval, are available immediately for setting up redundant power supply solutions.

Helpful guide for remote access

Helpful guide for remote access

The Phoenix Contact mobile communications quick start is a useful booklet, which is designed to help users interested in remote access solutions over the GSM or mobile network.

Radioline wireless system - now with a Modbus connection

Radioline wireless system - now with a Modbus connection

Trusted Wireless 2.0 technology transforms Radioline into a wireless system for reliable transmission - including in harsh industrial environments. I/O signals can now also be connected to controllers direct via a Modbus transmission protocol.

Immunity to interference for your Ethernet applications with M12 connection technology

Immunity to interference for your Ethernet applications with M12 connection technology

The new FL ISOLATOR 100-M12 offers reliable protection in the event of potential differences. This electrical isolator for Ethernet networks is designed for robust use in industry and railway applications.

Enhance the security of your automation network

Enhance the security of your automation network

Viruses, worms, and trojans don't stand a chance: the CIFS integrity check provided by our security routers detects whether a Windows system has been attacked by malware without the need to load virus patterns.

Implement PL and SIL correctly - with the new data sheet on safety characteristics

Implement PL and SIL correctly - with the new data sheet on safety characteristics

In consequence of the standards EN ISO 13849 and IEC 62061, the “Safety characteristics” data sheet has been adapted for use in safety-related applications.

New user manual for UPS management software

Configure and monitor your UPS solution at your leisure at the PC with the UPS-CONF software. The new user manual for this is now available for download.

New solid-state relays for high switching frequencies

New solid-state relays for high switching frequencies

Our range of PLC solid-state relay products now also enables you to safely detect pulses up to a limit frequency of 100 kHz where conventional solid-state relays are frequently out of their depth.

Intelligent UPS now also communicates with higher-level controllers

Intelligent UPS now also communicates with higher-level controllers

The new RS-232 data cable makes this possible

Full power even under the harshest conditions

Full power even under the harshest conditions

Even 100% humidity does not present a problem for our dip-coated power supply units. Thanks to their ATEX approval, the devices from the QUINT POWER range are now also completely suitable for use in potentially explosive areas.

New edition of the application manual for safety relays

New edition of the application manual for safety relays

The application manuals for our PSR safety relays have been revised in line with the EN ISO 13849 and IEC 62061 standards.

Cleverly combined: intelligent UPS module now with an integrated power storage device

Cleverly combined: intelligent UPS module now with an integrated power storage device

Reap the benefits of the intelligent QUINT UPS-IQ in confined spaces: the new UPS modules featuring an integrated power storage device will reduce your space requirements and wiring efforts.

Electric charging – safe and flexible

Electric charging – safe and flexible

EV Charge Control enables standard-compliant and reliable charging of electric vehicles – without an additional controller. The charging controller controls and monitors the charging of electric vehicles on the AC mains.

New system cabling solution for Mitsubishi PLCs MELSEC L and MELSEC Q

New system cabling solution for Mitsubishi PLCs MELSEC L and MELSEC Q

The new system cables now also enable you to connect numerous input/output cards of the Mitsubishi PLCs MELSEC L and MELSEC Q with the field. A wide range of VARIOFACE interface modules is available for jumpering the signals.

First safety app for functional safety - download free now

First safety app for functional safety - download free now

An optimal tool for machine builders and Machinery Directive and DIN EN ISO 13849-1 users: the safety app from Phoenix Contact is now available for free in the App Store.

Saves space and time: quick-action mechanism for PACT current transformers

Saves space and time: quick-action mechanism for PACT current transformers

The new quick-action mechanism allows PACT current transformers to be mounted quickly and securely on the power rail.

Configure safe isolating amplifiers easily in no time at all

Configure safe isolating amplifiers easily in no time at all

Find out how you can configure the safe and high-performance MACX Analog isolating amplifier quickly and easily.

Clever motor switching and smart wiring with CONTACTRON hybrid motor starters

Clever motor switching and smart wiring with CONTACTRON hybrid motor starters

Switch and reverse motors safely and reliably with compact hybrid motor starters - now available with SmartWire-DT™ connection and integrated short-circuit protection.

Safe speed monitoring with PSR-MOTIONSTOP

Safe speed monitoring with PSR-MOTIONSTOP

The configurable PSR-MOTIONSTOP downtime and speed monitor is used to monitor hazardous movements in your machine or system - in a fast, straightforward, and safe manner.

National IT summit: Phoenix Contact promotes easier M2M communication

National IT summit: Phoenix Contact promotes easier M2M communication

Phoenix Contact contributed to the sixth national IT summit - with the aim of making machine-to-machine communication as user-friendly as possible.

Maximum interference immunity over long distances

Maximum interference immunity over long distances

Switch to interference-free fiber optic transmission now. In addition to integrated diagnostic functions, the new fiber optic media converters for industrial Ethernet offer everything you need for diverse, industrial applications.

Fieldbus SHDSL extender now available with Ex approval

Fieldbus SHDSL extender now available with Ex approval

Now also in the Ex area: Use existing copper cables to integrate remote high-speed devices into your network - for RS-232, RS-422, and RS-485 interfaces.

Switch high DC loads without expensive power contactors - with the new PR special relays

Switch high DC loads without expensive power contactors - with the new PR special relays

The PR relay series from Phoenix Contact now also offers relays for switching large DC voltage loads, such as those in the power station and transport industries.

New approvals for QUINT DC/DC converters

New approvals for QUINT DC/DC converters

QUINT DC/DC converters with SFB technology open up new areas of application: They can now be used in potentially explosive areas as well as for shipbuilding.

DC/DC Converters for Cost-Effective Protection using Circuit Breakers

DC/DC Converters for Cost-Effective Protection using Circuit Breakers

DC/DC Converters for Cost-Effective Protection using Circuit Breakers. DC/DC converters in the Quint Power design are new additions to the Phoenix Contact product range.

The intelligent UPS - Fast installation with new brief instructions

The intelligent UPS - Fast installation with new brief instructions

For quick startup of your new UPS solution, all important information is provided in the new brief instructions. Self-explanatory pictures illustrate hardware and software installation. Request your free copy now.

Remote access to energy data - with the new EMpro web server

Remote access to energy data - with the new EMpro web server

Integrate the EMpro energy meters into your Ethernet network - and monitor all energy data from your machines and systems centrally via a web interface.

CONTACTRON motor manager now available with Ex approval

CONTACTRON motor manager now available with Ex approval

The CONTACTRON motor manager is now also approved for the operation and monitoring of electric motors in potentially explosive atmospheres.

Automatically calculate SHDSL data rates - for reliable project planning

Automatically calculate SHDSL data rates - for reliable project planning

The free PSI-SHDSL calculator software offers you support when theoretically estimating the maximum possible SHDSL data rate on a copper cable. As such, it offers increased reliability when planning your project.

Safety relay for SIL 3 and PL e now available in an additional range of voltages:

Safety relay for SIL 3 and PL e now available in an additional range of voltages:

The two-channel safety relay that can be used universally for safety hold and safety door monitoring is now also available for various supply voltages. It is suitable for applications up to SIL 3 and Cat. 4, PL e.

DIN EN ISO 13849 replaces EN ISO 954: Important information for those responsible for functional safety

DIN EN ISO 13849 replaces EN ISO 954: Important information for those responsible for functional safety

At the end of 2011, DIN EN 954 will cease to be harmonized with the Machinery Directive. This means that you should familiarize yourself with the upcoming changes now. We'll be happy to support you during the transition.

The intelligent UPS for industrial applications

The intelligent UPS for industrial applications

IQ technology makes the QUINT UPS-IQ an intelligent UPS. Take a look at our short tutorials to find out how you can use the full potential of IQ technology with the UPS-CONF software.

Save space and money: With the new PROFIBUS extender combined with DSL surge protection

Save space and money: With the new PROFIBUS extender combined with DSL surge protection

A great combination - the new PROFIBUS extender and DSL surge protection form a perfect partnership. When establishing high-speed line structures, only one extender and surge protective device is required per intermediate station.

The Phoenix Contact Catalogue App - download for free now

The Phoenix Contact Catalogue App - download for free now

App versus Internet: Smartphone users are spending an increasing amount of time using Apps. Phoenix Contact is staying abreast of these changes with its very own Catalogue App, which allows you to search for current products at your own convenience.

High-speed SHDSL modems - now also for railway applications

High-speed SHDSL modems - now also for railway applications

Now also for railway applications! Use existing copper cables to integrate remote high-speed devices into your network - for Ethernet and PROFIBUS.

Highest system availability with QUINT ORING redundancy modules

Highest system availability with QUINT ORING redundancy modules

Double the service life of redundantly operating power supply units with Auto Current Balancing Technology (ACB).

Increase efficiency in your photovoltaic system with new PV string monitoring

Increase efficiency in your photovoltaic system with new PV string monitoring

With the easy to integrate SOLARCHECK PV string monitoring, you will quickly detect power loss due to contaminated or damaged panels, for example, increasing the proceeds from your PV system.

Now you can configure the isolation amplifier even faster

Now you can configure the isolation amplifier even faster

With the new configuration assistance for the MINI Analog and MACX Analog product ranges, you'll find the right DIP switch setting for your desired signal combination in just a few clicks.

Easily configure SMS relay with software

Easily configure SMS relay with software

With the SMS-REL-CONF configuration software, you can easily configure the SMS relay. Learn about the software from the new tutorial and find out how you can use inputs and outputs for alerts or remote control via SMS.

Use HART signals - even without HART-capable I/O cards

Use HART signals - even without HART-capable I/O cards

Use your sensors and actuators' HART information without having a HART-capable controller - with the new HART transfer board.

Hazardous area approval for the new high-speed SHDSL modems

Hazardous area approval for the new high-speed SHDSL modems

Now also in the Ex area: Use existing copper cables to integrate remote high-speed devices into your network - for Ethernet and PROFIBUS.

New Ex-i repeater power supply with two electrically isolated outputs

New Ex-i repeater power supply with two electrically isolated outputs

Two in one: The MACX Analog Ex range device is just 12.5 mm wide and can simultaneously power two logic units with a 0/4...20 mA analog signal from the Ex area and the HART transparent.

New version of SAFECONF configuration software available

New version of SAFECONF configuration software available

The new SAFECONF version 2.7 now provides modular support to the configurable PSR TRISAFE configurable safety module. It also supports different output formats for SafetyBridge projects.

Power supply units in 18 mm housing for 48 V AC

Power supply units in 18 mm housing for 48 V AC

STEP POWER power supply units achieve high energy efficiency in their class. In housing that is just 18 mm wide, there is now a module for 48 V AC.

Rapid assistance: new wiring examples for PSR safety relays

Rapid assistance: new wiring examples for PSR safety relays

New wiring examples for PSR safety relays are now available in our e-shop. Use these for rapid practical help or for documenting your project.

The new Ex poster: the most important things about Ex marking at a glance

The new Ex poster: the most important things about Ex marking at a glance

Quickly find out what is behind Ex markers and which requirements the operating equipment labeled in this way fulfill - here, you can request the Ex poster for ATEX/IECEx and UL/FM Ex for free.

QUINT POWER increases your system availability - Now also up to 40 A

QUINT POWER increases your system availability - Now also up to 40 A

Increase the availability of your system: Phoenix Contact now offers two new power supply units with SFB technology and 40 A nominal output current.

New communication technologies on old cables - <BR> With high-speed DSL

New communication technologies on old cables -
With high-speed DSL

Use existing copper cables to integrate remote devices with SHDSL into your network by means of broadband - for Ethernet, PROFIBUS, and serial networks.

Plug and play for the Honeywell Experion® PKS C300 controller

Plug and play for the Honeywell Experion® PKS C300 controller

Reduce the amount of wiring involved: Using the VARIOFACE front adapter for system cabling, connect quickly and easily to the input and output cards of the Honeywell Experion® PKS C300 controller.

Now supported: PROFIBUS over 1200 m - up to 12 Mbps

Now supported: PROFIBUS over 1200 m - up to 12 Mbps

Broadband integration of remote PROFIBUS devices into your network: data rates of up to 12 Mbps and a range of up to 1200 m can now be achieved using existing copper cables.

Ex-i NAMUR isolation amplifier now with wide-range power supply

Ex-i NAMUR isolation amplifier now with wide-range power supply

Whatever your supply voltage, the new Ex-i NAMUR isolation amplifier does not require an additional power supply.

Universal current transducers: Now measure currents up to 600 A

Universal current transducers: Now measure currents up to 600 A

From DC currents through to highly distorted motor currents - whatever the wave form, our MCR current transducers accurately convert currents up to 600 A into standard analog signals.

Save energy with slim 18 mm wide power supply units

Save energy with slim 18 mm wide power supply units

For the first time, STEP POWER power supply units are available in slim housing that is just 18 mm wide. Benefit from maximum energy efficiency - even when space is limited.

New generation of Bluetooth converters: Proven technology with new features

New generation of Bluetooth converters: Proven technology with new features

The new generation enables even better monitoring of the wireless path and further savings during installation and startup.

TRIO diodes with 24 V or 48 V output voltage for 100% redundancy

TRIO diodes with 24 V or 48 V output voltage for 100% redundancy

Increase the operational reliability of your power supply units by using the two new slim diodes from Phoenix Contact in TRIO Power design with a width of just 32 mm.

Slim safety relay for emergency stop and safety door monitoring

Slim safety relay for emergency stop and safety door monitoring

The new PSR-ESAM4 safety relay for monitoring emergency stop or safety door functions saves space and offers automatic or manually monitored startup in one device.

Analog multiplexer saves up to seven analog inputs at your controller

Analog multiplexer saves up to seven analog inputs at your controller

Save analog inputs at your PLC today: The new MINI Analog multiplexer generates a single 4 ... 20 mA output signal from up to eight 4 ... 20 mA input signals.

Minimize wiring times with VARIOFACE system cabling for Inline

Minimize wiring times with VARIOFACE system cabling for Inline

Reduce your wiring costs and save space: Use a system cabling solution for quick and error-free connection to input and output terminals of the Inline automation kit.

Simplify startup with relay output modules with manual operation

Simplify startup with relay output modules with manual operation

The new VARIOFACE relay output modules with integrated LED, free-wheeling diode, and manual operation can be used to test the output functions of the relay output circuits much more easily.

High data rates via existing cables

High data rates via existing cables

Using modern SHDSL technology, data rates of up to 30 Mbps can be transmitted on existing copper cables. This means that existing copper cables can be used for new broadband applications.

New version of SAFECONF configuration software available

New version of SAFECONF configuration software available

With the new SAFECONF Version 2.5, you can configure safety controllers as well as test and simulate your safety logic.

Current transformer up to 300 A for direct, alternating, and distorted currents

Current transformer up to 300 A for direct, alternating, and distorted currents

The new universal current transducers support the direct conversion of currents into a 4...20 mA standard signal in photovoltaic systems and wind turbines.

Safe coupling relay for process automation

Safe coupling relay for process automation

The safety relay has been specially adapted to the requirements for the controllers used in process automation. They can be used to implement applications up to SIL 3 as per IEC 61508.

New fiber optics for greater ranges

New fiber optics for greater ranges

The HCS-GI cable can be easily assembled without needing gluing and its new gradient index profile enables a greater transmission range.

Worldwide connection of Ethernet networks with GSM modems

Worldwide connection of Ethernet networks with GSM modems

Easy and safe remote machine and system monitoring with TCP/IP-based PRS and EDGE connections.

New fiber optics T coupler for industrial Ethernet systems

New fiber optics T coupler for industrial Ethernet systems

The T coupler connects interference-free industrial 300 m Ethernet systems using the easily installable POF/HCS technology. The integrated redundancy and management functions ensure high availability.

Next generation of serial device servers

Next generation of serial device servers

The device supports all common serial interface standards. An adapted version is available for mechanical engineering applications.

The Power Professionals for use worldwide

The Power Professionals for use worldwide

Protect your equipment against the consequences of mains interruptions with the uninterruptible QUINT DC-UPS, a pure bundle of power.

VARIOFACE system cabling

VARIOFACE system cabling

In order to be able to wire process controllers fast, clearly and fault-free, Phoenix Contact system cabling now has matching connection solutions for the process I/O systems DeltaV from Emerson and S800 I/O from ABB.

PSR speed monitor

PSR speed monitor

New 45 mm slim PSR modules comfortably monitor drives up to safety category 4/EN 954-1 and SIL 3 – without any extra device hardware.

Fiber optic networking – PSI-MOS

Fiber optic networking – PSI-MOS

And as to ranges, high-performance FO interfaces open up new dimensions while still using the simplest of connection technology with polymer, HCS and glass fiber.

MINI ANALOG

MINI ANALOG

Measuring temperatures, converting or isolating signals – no problem with the new analog range from Phoenix Contact.

Wireless communication with Trusted Wireless I/O and Bluetooth<SUP>TM</SUP>

Wireless communication with Trusted Wireless I/O and BluetoothTM

Wherever analog and digital I/O signals need to be transmitted over distances of several kilometers, Trusted Wireless is exactly the right technology.

Bluetooth(TM) wireless communication

Bluetooth(TM) wireless communication

Serial data transmission via Bluetooth.

RS-232 / 485 meets Ethernet

RS-232 / 485 meets Ethernet

Simple integration of serial interfaces in industrial 10/100 Base-T(X) networks.

MINI Analog – New standards in the 6 mm class

MINI Analog – New standards in the 6 mm class

Measuring temperatures, converting or isolating signals – no problem with the new analog range from Phoenix Contact.

INTERFACE Wireless

INTERFACE Wireless

With the new RAD-ISM-2400-SET-UD, radio system, analog and digital sensor signals can be received and transmitted safely.

INTERFACE Ex - NAMUR isolation amplifier meets the SIL 2 requirements

INTERFACE Ex - NAMUR isolation amplifier meets the SIL 2 requirements

Phoenix Contact expands its range of products for safety-related applications with 2 more modules: The isolation amplifiers have corresponded to the SIL 2 requirements since the year of manufacture 2005.

Power for all

Power for all

The QUINT POWER universal power supply convinces with new products with its normal high quality, e.g. the single-phase 24 V power supply unit with 40 A output current

PSR safety relay – Utmost safety

PSR safety relay – Utmost safety

A new module with safe, slow-release contacts has been added to the PSR safety relay product family

RS-232 / 485 meets Ethernet

RS-232 / 485 meets Ethernet

Simple integration of serial interfaces in industrial 10/100 Base-T(X) networks.

Compact monitoring modules

Compact monitoring modules

... provide you with current, voltage, temperature monitoring, as well as 3-phase and directional monitoring in a particularly slim design.

VARIOFACE system cabling for Emerson DeltaV

VARIOFACE system cabling for Emerson DeltaV

The DeltaV system allows you to install the process wiring via "mass termination blocks" using flat-ribbon cable plug connectors. Phoenix Contact implements made-to-measure wiring with the product line INTERFACE Cabling.

VARIOFACE system cabling for SIMATIC S7 – Plug it in and go!

VARIOFACE system cabling for SIMATIC S7 – Plug it in and go!

The system concept of INTERFACE system cabling reduces manufacturing costs through fast, faultless and uniform wiring of the input and output modules.

INTERFACE Wireless

INTERFACE Wireless

With the new RAD-ISM-2400-SET-UD, radio system, analog and digital sensor signals can be received and transmitted safely.

System Cabling for the Inline Automation System

System Cabling for the Inline Automation System

Wiring is considerably reduced and takes just a few steps.

Electronic Load Relay for Parameterizable Soft Startup

Electronic Load Relay for Parameterizable Soft Startup

Now with parameterizable soft startup for asynchronous machines up to approx. 4 kW.

Motor Management - For all services along the Profibus

Motor Management - For all services along the Profibus

Motor Management from Phoenix Contact allows you to switch, measure, warn, protect, monitor and evaluate.

PSR safety relay – Utmost safety

PSR safety relay – Utmost safety

A new module with safe, slow-release contacts has been added to the PSR safety relay product family

More News



PHOENIX CONTACT Ltd
Halesfield 13
Telford
Shropshire
TF7 4PG

Telephone: 0845 881 2222
Fax: 0845 881 2211
e-mail: marketing@phoenixcontact.co.uk

Registered in England No. 1919983
VAT Registration No. 363378239